KNX Power supply unit with diagnostics

Specifications & Special Features:

• The first 640mA power supply unit in its class with a mounting width of only 2 space units (36mm)
• Lower installation cost due to low space consumption
• Output overload and short circuit protected
• Additional unchoked auxiliary power output
• Wide variety of diagnostic and logic functions
• Remote reset function: reset by communication object
• Monitoring of output voltage, output current, bus traffic load and device temperature
• Monitoring of events (threshold, device startup, KNX bus restart)
• Monitoring of output failures (due to overload, short circuit, AC break)
• Configurable threshold functionality for further evaluation
• Switching of KNX bus devices
• Informational readout: cyclic, on demand or after change in value
• Configurable additional alarms
• Large number of communication objects available
• Device status indicated by six duo LED display
• Internal supply via externally-connected 230 V AC
• Can be used with ETS4 and higher
• All configurations can be done via ETS
• Device reset over the databus or with a push button
• Installation module for 35mm top-hat rails (DIN, TH35)