Room controller display compact module 2-gang

For cover kit 2-gang, complete, ref.-no.: xx502 TSA xx in the LS range
It can be extended by means of a room controller extension module, ref.-no.:LS 5178 TSEM
And can be extended by means of a push-button extension module, ref.-no.:LS 509x TSEM

Recommended mounting height: 1.5 m

Intended use

• Measurement and feedback control of the room temperature
• Operation of loads, e.g. light on/off, dimming, blinds up/down, brightness values, temperatures, calling up and saving light scenes, etc
• Installation in wall box according to DIN 49073

Product characteristics

Each button can be used for push-button sensor of contoller functions.

• Backlit LC display
• One or two functons per button
• To be completed with cover kit
• Eight status LED - red, green or blue
• Brightness of status LED and LCD adjustable
• Integrated bus coupling unit
• Connection of extension modules
• Integrated room temperature sensor
• External sensor (ref.-no.: FF 7.8) can be connected
• Room temperature control with setpoint value specification
• Two internal independent controllers for two independent areas - in connection with extension modules
• Display of room or set temperature (°C or °F)
• Display of outdoor temperature - with external sensor, e.g. weather station
• Display of time, in conjunction with KNX time encoder
• Push-button function or rocker function
• Inhibit function: blocking or change of function of the entire or single button functions
• Alarm function, optional with acknowledge by pressing any button
• Function symbols can be shown

Optional Accessories

External sensor ref.-no.: FF 7.8