eNet radio hand-held transmitter

1-gang Toggle

Intended use

• Radio hand transmitter for radio transmission of switching, dimming, and blind movement commands
• Operation with radio actuators from the eNet system

Product characteristics

• One button for switching and dimming a channel
• Status indication with LED
• Battery-powered device
• Signalling of transmission errors can be switched off

Can be set with eNet server

• Scenes: All On, All Off, individual scenes
• Operation locks

Supplementary functions with eNet server

• Update of the device software
• Reading of error memory

Operating light

• Switching: Press the button for less than 0.4 seconds
• Dimming: Press the button for longer than 0.4 seconds. The dimming process ends when the button is released
• Switching on at minimum brightness: Press the button for longer than 0.4 seconds

Operating blind

• Moving the Venetian blind: Press the button for longer than 1 second
• Change of direction for moving blind: Press the button for longer than 1 second
• Change of direction for stationary blind: First, press the button for less than 1 second, then press the button for longer than 1 second
• Stopping the blind: Press the button for less than 1 second
• Adjusting the blind: Press the button for less than 1 second

Operating push-button actuator

• Push-button: The load is switched on for the duration of the button-press

The maximum actuation length is 60 seconds.