eNet radio hand-held transmitter 2-gang

Intended use

• Hand transmitter for radio transmission of switching, dimming, blind movement and scene commands
• Operation with radio actuators from the eNet system

Product characteristics

• Two adjacent buttons each belong to one channel
• Status indication with LED
• Switch-on brightness of dimmer actuators can be saved
• Battery-powered device
• Scenes, radio hand transmitter, 2x: All Off, three individual scenes
• Signalling of transmission errors can be switched off

Can be set with eNet server

• Master dimming function
• Scene All On
• Operation locks

Supplementary functions with eNet server

• Update of the device software
• Reading of error memory

Operating light

• Switching: Press the button for less than 0.4 seconds
• Dimming: Press the button for longer than 0.4 seconds. The dimming process ends when the button is released
• Switching on dimmer actuators at minimum brightness: Press the right-hand button for longer than 0.4 seconds
• Switching on dimmer actuators at minimum brightness and dimming to maximum brightness: Press the left-hand button for longer than 0.4 seconds

Operating blind

• Moving the Venetian blind: Press the button for longer than 1 second
• Stop or adjust blind: Press the button for less than 1 second

Operating push-button actuator

• Push-button: The load is switched on for the duration of the button-press

Recalling scenes

• Press the scene button briefly

Changing scene

Actuators switch to the saved scene.

• Setting a new scene
• Press scene button for longer than 4 seconds

Actuators first switch to the old scene and save the new scene after 4 seconds.

Save switch-on brightness

With dimmer actuators a brightness value can be saved to which the dimmer actuator switches after a short button press.
The buttons of a channel are set as channel buttons.

• Set required switch-on brightness
• Press both buttons of a channel simultaneously for longer than 4 seconds

The light is briefly switched off and switched on again to the switch-on brightness. Switch-on brightness is saved.

Polling sum status

• Press both buttons of a channel simultaneously for 1 to 4 seconds

Signalling of radio transmission and group status.