Description
Switch Actuator, 8-fold, 16/20 A, MDRC
The 16/20 A Switch actuators
SA/S x.16.6.1 are modular installation
devices in Pro M Design for installation
in the distribution board. The devices
are especially suitable for switching
loads with high peak inrush currents
such as lighting equipment with compensation
capacitors or fluorescent
lamp loads (AX) to EN 60 669.
The Switch actuators feature one load
current detection per output. The maximum
load current per output is 20 A.
Manual actuation of the switch actuator
is possible using a button. This
simultaneously indicates the switching
state.
The Switch actuators can switch up
to 12 independent electrical loads via
floating contacts. The maximum load
current per output is 20 A. The connection
of the outputs is implemented
using universal head screw terminals.
Each output is controlled separately via
the KNX.
Individual outputs can be copied or
exchanged to reduce the programming
effort withn the SA/S x.16.6.1 devices.
The device does not require an additional
power supply and is ready for
immediate use, after the bus voltage
has been applied. The Switch actuators
are parameterized via the ETS. The
connection to the KNX is implemented
using the bus connection terminal on
the front.